Technical Training

29 CFR 1926.1153 Respirable Crystalline Silica (Table 1)

The full text of OSHA's construction silica standard, including Table 1, which lists specific tasks such as sawing, grinding, and milling with the required engineering controls and respirator use. Owners and supervisors should read Table 1 for the exact tasks their crews perform. This is the regulation itself, not a summary.

American Concrete Institute (ACI)

ACI's site with public information on concrete practice, free FAQs, and the catalog of standards and certification programs. It is the recognized technical body for concrete, and concrete maintenance crews can use its FAQs for questions on curing, joints, and repair. Standards and most courses are paid.

Asphalt Institute Engineering Resources

The Asphalt Institute's engineering page with public technical information on asphalt materials, mix design, and pavement construction. It is a recognized industry source for questions about binders, compaction, and patching materials. Some publications and courses are paid; the page itself is free to browse.

FHWA Concrete Pavement

FHWA's concrete pavement program page with technical guidance on design, construction, preservation, and repair of concrete pavements. Concrete maintenance crews doing joint sealing, partial-depth patching, and slab repair can find the federal guidance here. Estimators can use it to explain treatment options.

FHWA Manual: Repair of Potholes in Asphalt Pavements (FHWA-RD-99-168, PDF)

FHWA's research manual on materials and procedures for pothole repair, including throw-and-roll, semi-permanent, and spray-injection methods and how they performed. It is the public reference for choosing a patching method and explaining the trade-offs to a customer. Useful for estimators and asphalt maintenance crews.

FHWA Manual: Sealing and Filling Cracks in Asphalt Pavements (FHWA-RD-99-147)

FHWA's research manual on materials and procedures for sealing and filling cracks in asphalt-surfaced pavements, from the SHRP pavement maintenance studies. It covers crack preparation, routing, material selection, and application configurations. Crack repair technicians and estimators can use it as the technical backbone for their crack sealing practice.

FHWA Nighttime Visibility and Pavement Marking Retroreflectivity

FHWA's nighttime visibility program page covering pavement marking and sign retroreflectivity, maintenance, and related rules. Striping crews and estimators should understand why retroreflectivity matters and how it is measured. The page links to guidance used by state DOTs.

FHWA Pavement Preservation

FHWA's pavement preservation site explaining the preservation approach, treatment types, and when each is appropriate. Crack sealing, sealcoating, and thin overlays are preservation treatments, and this is the public source that describes them. Estimators and owners can use it to explain the value of preservation to customers.

Minnesota PCA Smart Salting Training

The Minnesota Pollution Control Agency's Smart Salting program page describing training on applying the right amount of deicer for parking lots, sidewalks, and roads. It is a state example of salt best practice that reduces cost and environmental harm. Snow crews in any state can learn from the approach; check your own state for local programs.

Minnesota Statute 116.202: Coal Tar Sealant Restriction

The Minnesota statute restricting the sale and use of coal tar-based sealant products. It is an example of a state-level restriction that sealcoating contractors must check before choosing a product. Rules vary by state and city, so confirm your own jurisdiction.

MUTCD 11th Edition (Temporary Traffic Control, Part 6)

FHWA's page for the current Manual on Uniform Traffic Control Devices, including Part 6 on temporary traffic control, which governs signs, cones, tapers, and flagging in work zones. It is also the national reference for pavement marking standards in Part 3. Crews that set up traffic control or stripe roads should know where to find it.

National Asphalt Pavement Association (NAPA)

NAPA's public site with industry information on asphalt pavement, sustainability, and technical resources. It is a recognized industry body and a starting point for owners who want to keep up with asphalt industry practice. Some resources are members-only or paid.

OSHA Silica in Construction Hub

OSHA's page on respirable crystalline silica for construction, with links to the standard, Table 1 control methods, fact sheets, and compliance help. Concrete sawing, grinding, milling, and dry sweeping on pavement jobs all create silica dust. Owners use this to set up controls; crews use it to understand why wet cutting and vacuums matter.

OSHA Winter Weather

OSHA's winter weather page covering cold stress, winter driving, snow removal hazards, and slips on ice. Snow and ice crews face all of these in one shift. Foremen can use it for a cold-weather toolbox talk and to plan warm-up breaks.

Snow and Ice Management Association (SIMA)

SIMA is the industry association for professional snow and ice contractors, with public information on best practices, safety, and industry standards. Pavement contractors who plow in winter can use it to learn the business side of snow work. Training and certification programs are paid.

USGS: Coal-Tar-Based Pavement Sealcoat and PAHs

USGS research summary on coal-tar-based sealcoat as a source of polycyclic aromatic hydrocarbons in the environment. Several states and cities restrict or ban coal tar sealers, and customers ask about it, so contractors should know the science behind the debate. This page is research, not a regulation.